FILE

DATE

TYPE

New: InstallTact 2.2 XP 080311.exe	March 11, 2008.	Software
How to setup cross talk cancellation feature	December 27, 2006.	Manual
Manual	June 2, 2006.	Manual
2.2 XP Guide To Equal Loudness Compensation	July 14, 2006.	Manual
Dynamic Room Correction	August 8, 2006.	Documentation
2.2 XP Automatic Correction	August 23, 2006.	Documentation
Tact-2.2XP Quick Start	March 28, 2007.	Manual
TacT 2.2 XP Auto Target Curve.doc	May 03, 2007.	Manual

How to update the Tact-2.2 XP firmware program?

Before starting with the programming sequence, make sure that only one Tact-2.2 XP is connected to your PC and that there is no other Tact device connected to RS232 AUX connector.

1. Using the back panel power switch, turn the Tact-2.2 XP power off.

2. Push and hold down the DIGITAL button and turn the power ON. This will place your Tact-2.2 XP into programming mode.

3. On your PC open the Tact-2.2 XP program.

4. Click on the COM to open the RS-232 Connection To Tact-2.2 XP window. In the Options menu select Global device address and make sure that PC is communicating with the Tact-2.2 XP. If the communication functions properly, exit this screen and proceed to the next step.

>5. Go to the Add-Ins menu and click on the Upgrade Tact-2.2 XP menu option.
Click on the Program button to upgrade the main program.
Click on the Program RCS button to upgrade the auxiliary RCS program.

After the programming is complete, exit this screen and turn the selected Tact-2.2 XP off and back on again.