TCS mkIII – Twelve Channels Surround Sound Processor
+
The new Boz-216/2200 Sixteen Channels Amplification System

TCS mkIII combined with Boz-216/2200 amplifier system offers Dynamic Room Correction on twelve channels and up to sixteen channels of high performance digital amplification.

TSC mkIII benefits: 12 Channels of Dynamic Room Correction User selectable number of subwoofer and main channel outputs. Any TCS mkIII output can be set as subwoofer or main channel. Eight channel mixer on all twelve outputs. Surround sound decoder outputs, 8 channels in total, can be routed and mixed into any TCS mkIII output. If you have up to eight discrete analog or digital audio signals, just connect them to TCS mkIII multi channel analog or digital inputs and TCS mkIII will process them as if they were supplied by the surround sound decoder. Set your HDMI source to multi channel PCM output and TCS mkIII will process them as if they were supplied by the decoder output. Change all Room Correction parameters on the fly as you listen to your music. You can adjust any of twelve target curves, crossover filters, dynamic target curves and all other correction parameters without any interruption to the played music. Backup entire TCS mkIII internal data into your PC. Subwoofer Diversity Correction. Allows your subwoofers help each other to correct your room response. You have full control over all measurement and correction parameters. Extensive set of RS232 control codes.

Boz-216/2200 benefits Pure digital amplification with extremely accurate signal transient tracking. System consists of Boz-216 controller and of up to eight Boz-2200 stereo amplifier modules. Separate AC power control and conditioning unit. Separate two channels amplifier modules with mono block design. Each module consists of two completely separate amplifiers each capable of outputting 250W into 8 Ohms or 500W into 4 Ohms load. Each module supports loudspeaker design package with low-pass, high-pass, band-pass and parametric equalizer on each output. Filter crossover frequency can be set anywhere between 15Hz and 20KHz with resolution of 1Hz. Delay time and level balancing on all channels. Unmatched sonic performance. If you prefer to listen to what was recorded on your CD and not to amplifier designers, transparency of the Boz-216/2200 is your ultimate choice. The combination TCS mkIII and Boz-216/2200 Perfect integration for an all digital high-end surround sound system Digital input audio signal stays in digital domain all the way to the output terminals of Boz-2200 modules. No signal loss or degradation commonly found in analog systems. TCS mkIII controls the Boz-216/2200 system. Volume control implemented in each Boz-2200 module by changing power supply voltage rather than manipulation digital audio signal. If you need to bi-amp some of your surround sound loudspeakers the Boz-216/2200 system supports both vertical and horizontal bi-amping with or without built in crossover filters.

Unmatched performance of TCS mkIII and Boz-216/2200 combination makes this system ideal for no compromise high-end home theater solution.

 For more details on TCS mkIII click on: http://www.tactlab.com/Products/TCSmkIII/index.html

For more details on Boz-216/2200 click on: http://www.tactlab.com/Products/BOZ/index.html