This
operating mode assumes a stereo system consisting
of two main channels only.
To
select 2.0 mode from the main screen, click
on the MENU button to enter
main menu screen and then select the MODE menu. In the MODE menu click
on STEREO 2.0 option. This
will select 2.0 mode and display it on top
of the screen (1).
Fig.
8. Mode menu. 2.0 mode selection is displayed
in the upper left corner (1).
The
rest of the procedure is the same as in 2.2
mode. Note the change in the measurement
screen in Fig. 9. The Tact-2.2 XP will automatically
select channels for measurements based on
the mode selection.
In 2.0 mode only the Left and Right channels
will be measured. At the end of the measurement
process the Subwoofer Left and Subwoofer Right
measurement data will be set to 0 dB flat
response.
Fig.
9. Measurement screen for 2.0 mode. Note
that LS and SR do not have a rectangles
around them, indicating that these channels
are not set for measurement.
